Skip to content

Connect cameras

Add cameras

Connect at least 2 cameras to your PC.
Click Add camera button at the top of the MocapForAll window.
Select the combo box next to Camera: to find the connected camera.

  • You can change the image size of the camera by entering the dimensions and clicking Apply if camera supports the specified image size.

    If it fails to change image size

    Somtimes it fails to change the image size. In that case, please close camera, wait for a moment, and try again.

  • You can flip the image horizontally.

    Flip image if necessary

    Some cameras have a mirror image by default. If the image is a mirror image, the AR marker cannot be read.

  • You can rotate the image.

    Rotate camera properly

    At the start of capture, only a person standing upright can be recognized. So, rotate the image appropriately according to the actual orientation of the camera.

Select camera control framework

You can select the framework to control the camera by pressing the ▼ next to Add camera at the top of the MocapForAll window.

  • Direct show: Microsoft's media framework. You can use the OBS-VirtualCam plugin with this.
  • UE4 media player: UE4's media framework. Better performance at high resolution. Some cameras don't work with this.
  • Recorded video: Use recorded video instead of camera. See Motion capture from recorded videos.

If the camera works with UE4 media player, it is recommended to use it. If it doesn't work, use Direct Show.